# Device Setup (Required)

## Disable Hidden Devices

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2F3yBZWAUSib0mjCur7HMo%2Fimage.png?alt=media&#x26;token=20a38b8b-8e7e-448f-a13b-5b188f4441f6" alt=""><figcaption></figcaption></figure>

Now, delete every single thing that is Grey. For example : (The USB DISK USB Device is Grey) Do it for every single Grey device NOT ONLY DISKS, EVERYTHING)

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2Fw59cf5YnS9VGIBsMa492%2Fimage.png?alt=media&#x26;token=99993574-ca7b-41ff-96b0-5277ea77fdb4" alt=""><figcaption></figcaption></figure>

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FNoKnvfDA9xaYjVcpv7fs%2Fimage.png?alt=media&#x26;token=27ac4634-12fe-42cc-9537-54be405c7d78" alt=""><figcaption></figcaption></figure>

## Change adapter properties

1. Press **Win + R**, type **ncpa.cpl** and click **Ok**

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2F3NowDHriFUJ2mwpL3L3W%2Fimage.png?alt=media&#x26;token=25ffc9eb-123f-4528-89b9-ae4dca802b80" alt=""><figcaption></figcaption></figure>

2. Right-Click your active connection and click on **Properties**
3. Configure it as shown below: (DO IT FOR EVERY ADAPTER)  <https://streamable.com/vgc51e>

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FucqEOR4uPIALe2PItmU0%2Fimage.png?alt=media&#x26;token=39de29ae-93bd-4eda-885f-ec96b4ee3d0c" alt=""><figcaption></figcaption></figure>

4. Click Configure

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FqQ0j2gkpfOh8OBfED1NS%2Fimage.png?alt=media&#x26;token=71b7a12b-f4b7-4926-9e3b-48a1aef8c604" alt=""><figcaption></figcaption></figure>

5. Switch to **Advanced** and configure the following properties:&#x20;

**Advanced EEE - Disabled**&#x20;

**ARP Offload - Disabled**&#x20;

**Flow Control - Disabled**&#x20;

**IPv4 Checksum Offload - Disabled**&#x20;

**Large Send offload v2 (IPv6) - Disabled**&#x20;

**Network Address - Not Present**&#x20;

**TCP Checksum Offload (IPv6 ) - Disabled**&#x20;

**UDP Checksum Offload (IPv6 ) - Disabled**

{% hint style="warning" %}
If you don't have some of these options skip them and move on to the next step.
{% endhint %}

## Disable unused Network adapters

1. Press **Win + R**, type **ncpa.cpl** and click **OK**

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FiRmuzIGJDyiAfotAR3LV%2Fimage.png?alt=media&#x26;token=f76e37d8-d5c3-4739-8c14-58aade208045" alt=""><figcaption></figcaption></figure>

2. Remember the name of the active connection
3. Right-click the Windows logo, select **Device Manager**
4. Right-click and select Uninstall **device** on all other Network adapters

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FFq90cU8y3PzQ1zPsPSd1%2Fimage.png?alt=media&#x26;token=f0a010d2-7fd4-47b4-90e1-c7b3d6c875fc" alt=""><figcaption></figcaption></figure>

Now You should Only Have One Device Here Being Your Network

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2Fn3MWtqmRadO5YRkUTsHQ%2Fimage.png?alt=media&#x26;token=b9d05842-41e2-4fe5-a2c8-7656b1ab9a51" alt=""><figcaption></figcaption></figure>

## Disabling Bluetooth

{% embed url="<https://mega.nz/file/nZMQiYLC#-eNYRwFkoYpCdDfCp7jsuSrGQEwVpHk5h1cFXH3LpjQ>" %}

1. After Running This As Admin Restart PC

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FUChyqC9WEdPq1TGaGJsi%2Fimage.png?alt=media&#x26;token=5435172b-902a-47e1-a01a-b5f896f8a43c" alt=""><figcaption></figcaption></figure>

Should Look Like This

## Change Monitor Serials&#x20;

{% embed url="<https://www.monitortests.com/forum/Thread-Custom-Resolution-Utility-CRU>" %}

1. Download CRU above
2. **Disable** G-SYNC if your monitor support that - IMPORTANT OR YOU WILL BLACK SCREEN

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2F93FHL8oOvelR27S2oNOx%2Fimage.png?alt=media&#x26;token=837818f3-663f-49d7-98e1-e47c92a51b6e" alt=""><figcaption></figcaption></figure>

3. Follow the video to change serials for all your monitors

{% embed url="<https://streamable.com/6ibjqa>" %}
