# Spoof HWID

1. Run Loader
2. Enter key (Check Remember me)
3. Login

{% hint style="warning" %}
Recommend Using EFI / Regular Due to it being the safest option
{% endhint %}

{% tabs %}
{% tab title="UEFI" %}
{% hint style="info" %}
**Enable** GPU Spoofing for <mark style="color:red;">**FiveM**</mark>
{% endhint %}

{% hint style="warning" %}
**BEFORE** Using UEFI Spoof make sure to run **PermFixer.bat** and **REBOOT** your device to avoid any issues.&#x20;
{% endhint %}

1. Press **UEFI Spoof**

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FCOgk2McXMYxT2KowLDq5%2Fimage.png?alt=media&#x26;token=5ed5a5f4-c5f8-4ce2-9658-6fc90f483daf" alt=""><figcaption></figcaption></figure>

2. Choose your motherboard and click **Spoof (if you are a different motherboard press other)**

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FvgrpDKJ35t6m5sgpCIKJ%2Fimage.png?alt=media&#x26;token=e68160a4-4758-43d4-8849-00f93c11bada" alt=""><figcaption></figcaption></figure>

3. Restart your PC
4. Run Loader & login
5. Click Serial Checker to compare your serials&#x20;
6. Now do the Device Setup

**This is how it should look like if you used UEFI spoof (aka load with driver)**

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2Ff8iLr6JtT5dpamJ5L5wp%2Fimage.png?alt=media&#x26;token=4594ab08-6f7a-4b1d-b158-7a75d6d6c2aa" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="EFI" %}

1. Use the **EFI** method

{% hint style="info" %}
**Enable** GPU Spoofing for <mark style="color:red;">**FiveM**</mark>
{% endhint %}

2. Click EFI Spoof

   <figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FuysTxRDxIEdHCVN6OVQu%2Fimage.png?alt=media&#x26;token=f7ca4092-0c47-4ecb-8646-584f29494cf1" alt=""><figcaption></figcaption></figure>

   \
   3\. Choose your motherboard and click **Spoof**

   <figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FBX8B7VPgf2yEV1Vx78Uk%2Fimage.png?alt=media&#x26;token=1872b0c8-9bfc-4c09-9527-caa32cfa9069" alt=""><figcaption></figcaption></figure>

   ### Download WinRAR <a href="#download-winrar" id="download-winrar"></a>

{% embed url="<https://www.win-rar.com/download.html?L=0>" %}

### Load Using EFI <a href="#load-using-efi" id="load-using-efi"></a>

1. Format your drive partition as shown below:

{% embed url="<https://streamable.com/z6qlxt>" %}

2. The required files will be placed on your Desktop automatically:

   <figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2F6KfthPob99NbIV0Y7QHA%2Fimage.png?alt=media&#x26;token=2f59643e-61ec-45cf-a95a-e86e6975afc4" alt=""><figcaption></figcaption></figure>
3. Extract efikit.rar using WinRAR
4. Drag startup.nsh into the extracted folder

{% embed url="<https://streamable.com/o2dmd3>" %}

{% hint style="warning" %}
Make sure to set the newly formatted USB/Partition into 1st boot priority in bios
{% endhint %}

5. Restart your PC
6. Run loader & login
7. Click Serial Checker to compare your serials
8. Now do the Device Setup

**This is how it should look like if you used EFI spoof (aka load with driver)**
{% endtab %}

{% tab title="Regular" %}
{% hint style="danger" %}
To use Regular spoof you must be on an **UNLOCKED** motherboard.
{% endhint %}

1. Press **Regular Spoof**

   <figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FfecIY6L1FxojmJAqHVWi%2Fimage.png?alt=media&#x26;token=c65bab95-5a4f-4a40-b3d2-49fcb14dfc1a" alt=""><figcaption></figcaption></figure>

2. Choose your motherboard and click **Spoof**

   <figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FzoroPnTOsWFjoDrimEEZ%2Fimage.png?alt=media&#x26;token=e48c9af8-3ab4-4f4d-be45-2f1f7681fad0" alt=""><figcaption></figcaption></figure>

3. Restart your PC&#x20;

4. Run loader & login

5. &#x20;Click Serial Checker to compare your serials&#x20;

6. Now do the Device Setup

**This is how it should look if you don't load with a driver (aka load without a driver or Regular spoof)**

<figure><img src="https://80706618-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMuHCPQetXtyVElAafvmN%2Fuploads%2FtzkxYFKCQNd4kOgRDzvE%2Fimage.png?alt=media&#x26;token=90de8a2c-d1b6-42ec-b73d-3c2c71930c6b" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

\\
